Lux Solar manufactures explosion-proof (ATEX/IECEx) lighting and signalling equipment for marine aids to navigation, helidecks and aircraft obstruction marking. Daly Middle East supplies the Lux Solar range to the UAE and wider GCC for offshore platforms, helidecks and tall-structure hazardous-area installations.
HELIDECK MONITORING AND STATUS LIGHTING: the Lux Solar HMS-LXS-Ex Helideck Monitoring System repeater status light and the WOL-LXS-Ex STATUS/WAVE OFF light are both CAP437 compliant, combining amber, red and blue LEDs (HMS) or a dimmable red beacon (WOL) to signal helideck landing status to pilots. Browse the listed products in the
Status Lights category.
OBSTRUCTION LIGHTING: the Lux Solar MIOL Ex Medium Intensity Obstruction Light covers ICAO Annex 14 and FAA L-864/L-865 obstruction marking for structures between 45 m and 150 m – flares, silos, chimneys, cranes and tanks – in five beacon types with explosion-protected "eb mb" and "de" variants. See the full range in
Helideck Obstruction Lights.
MARINE AIDS TO NAVIGATION: the Lux Solar Marine Navigation Beacon Ex Night-Mode 10nM (MNL-LXS-10nM-Ex) is an explosion-proof LED marine navigation light for offshore platforms, with 10 nM night-mode intensity, a white flashing "U" Morse code character and IP66 protection, listed under
Marine Navigation Lights.
Products across the Lux Solar range carry ATEX and IECEx certification for Zone 1/21 and Zone 2/22 hazardous areas, alongside CAP437 compliance for helideck equipment and ICAO/FAA compliance for obstruction lighting.
HOW TO START AN ENQUIRY: provide the installation location (offshore platform, helideck or vessel), the hazardous-area zone classification, mounting height or elevation, and whether a control panel or Motion Monitoring System integration is required. Daly Middle East will match the requirement to the correct Lux Solar product and configuration.
Request a Lux Solar quotation with your application details, or browse the listed products below.
