Denso Tape Uses: Corrosion Protection for Underground and Marine Pipe

Reviewed by the Daly Middle East technical team — application engineers specialising in ATEX/IECEx hazardous-area lighting and instrumentation.

Overlapping tan petrolatum tape around a buried steel pipe joint in an open trench.
AI-generated illustration.

Denso tape is a cold-applied petrolatum tape that protects steel pipes and fittings from corrosion. It is wrapped by hand over the metal. The petrolatum compound bonds to the surface and seals out moisture and oxygen, the two things corrosion needs. No heat, no special equipment and no curing time are involved.

Denso Tape Uses

  • Underground pipes. Wrapping buried steel pipelines for water, gas, oil and fire mains.
  • Pipe joints and welds. Protecting field joints where the factory coating stops.
  • Fittings, valves and flanges. Moulding around bolts, bends and irregular shapes that sleeves cannot cover.
  • Coating repairs. Patching damaged areas of an existing pipe coating.
  • Marine and offshore steelwork. Protecting piles, risers and fittings, with a suitable outer wrap where the specification requires.

Denso Tape for Underground Pipe: Application Steps

  1. Prepare the surface. Remove loose rust, scale, oil and dirt to the level required by the datasheet.
  2. Prime. Apply the specified primer or paste to the steel, and pack voids around bolts and welds.
  3. Wrap the tape. Wrap in a spiral with the overlap given by the specification. Smooth it so there are no air gaps.
  4. Add an outer wrap. Protect the tape with an outer layer where the pipe will be backfilled or exposed to damage.
  5. Inspect and backfill. Check the wrap is continuous before the trench is closed.

Why Petrolatum Tape?

  • Applied cold, so it is safe to use where hot work is not allowed.
  • Tolerant of surface preparation compared with many paint-on systems.
  • Moulds around valves, flanges and bends.
  • Minimal training needed and quick to apply on site.

Denso Products from Daly Middle East

Daly Middle East supplies Denso corrosion protection products in the UAE and GCC, including Denso Colourtape petrolatum tape and the Denso anti-corrosion tape range. Contact our team with your pipe size, service and environment and we will recommend a system.

Denso Tape: Frequently Asked Questions

What is Denso tape used for?

Denso tape is a petrolatum tape used to protect steel pipes, fittings, valves and flanges from corrosion. It is applied by hand, cold, and moulds around awkward shapes.

Can Denso tape be used on underground pipes?

Yes. Petrolatum tape is widely used to wrap buried and submerged steel pipelines, joints and fittings. Use an outer mechanical wrap or follow the specification where the pipe is backfilled with rough material.

Does Denso tape need heat or special tools?

No. Petrolatum tapes are cold-applied. Prepare the surface, apply primer or paste where the specification calls for it, then wrap by hand.

How much overlap should I use?

Follow the manufacturer datasheet and your project specification. A spiral wrap with a defined overlap, so that every part of the pipe is covered by at least two layers, is common practice.

How do I choose the right Denso tape?

Choose by service temperature, pipe diameter, whether the pipe is buried, submerged or in the splash zone, and the coating system you are tying in to. Ask us if you need help choosing.