A good retrofit trial answers a question a datasheet cannot answer on its own: can the crew see their work better in this building? Pick a representative bay, platform or loading area. Include typical obstructions, equipment positions and the normal working shift in the trial.
Measure what the current fittings deliver
Record fitting count, actual input power where safe to measure, switching hours and the maintenance history. Take illuminance readings on the tasks people perform. A gauge face and a walking surface can need readings on different planes. Log any daylight contribution and use comparable conditions when you repeat the survey.
Test the proposed layout
Compare a candidate LED system with the existing halogen, fluorescent or discharge fixtures using photometric data. Select the optics, mounting height and aim that suit the work. Check glare from common eye positions, floor-level uniformity, colour recognition and visibility around moving equipment. For a classified location, clear the certification and installation review before arranging any live trial.
Use the numbers to decide whether to roll out
For an illustrative comparison, replacing 20 fittings drawing 250 W each with 20 fittings drawing 120 W each at 4,000 hours per year reduces estimated lighting consumption from 20,000 to 9,600 kWh per year. The saving assumes the same runtime and fitting count. Add drivers, access equipment, spare holdings and production interruptions to the cost comparison. A Daly lighting survey can help establish the baseline, and the Red Sky Lighting range provides candidates for the model review.
Contact Daly Middle East to discuss your project requirements.