How to Read Gas Group, Temperature Class and Ambient Range on an Ex Light

Reviewed by the Daly Middle East technical team — application engineers specialising in ATEX/IECEx hazardous-area lighting and instrumentation.

When two floodlights carry similar Ex markings, a single line on the nameplate can decide whether either is suitable. Start with the classification and design conditions supplied by the site. Then read the marking on the exact model alongside the applicable certificate and instructions.

Gas group tells you which atmosphere the equipment covers

For surface-industry gases, IIA, IIB and IIC identify equipment group subdivisions. Some equipment has a specific extension such as IIB+H₂. Treat that extension as applying to hydrogen under the documented scope. Check an application involving another IIC gas against the actual marking and certificate. Dust groups and dust surface-temperature limits require their own review.

Temperature class and ambient temperature answer different questions

For a gas marking, T4 represents a maximum equipment surface temperature of 135 °C under the specified conditions. The permitted ambient range describes the surrounding temperature at which the certification applies. A fitting mounted near hot equipment or exposed to direct sun can experience conditions different from the site weather reading. Ask the responsible engineer to evaluate the installed location.

Read the protection concept as part of the complete marking

Intrinsic safety limits electrical and thermal energy capable of causing ignition. Flameproof protection uses an enclosure designed to contain an internal explosion and prevent flame transmission to the surrounding atmosphere. The protection concept, group, temperature information, equipment protection level and specific conditions all matter. Use Daly’s Nightstick range if you need a portable example, and verify the marking and battery instructions for the individual light.

See the Daly explosion protection knowledge hub and the IEC standard for intrinsic safety.

Contact Daly Middle East to discuss your project requirements.